Although this report is about sustainable nonwovens, today there are no completely sustainable nonwovens. Sustainability is a quality to strive for and progress toward but rarely wholly attainable.

Sustainability is defined, in general, by the The United Nations Commission on the Environment and Development, which says that ‘sustainable development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs.’ For nonwovens, EDANA defines sustainable development, or sustainability, as the reconciliation of economic growth with environmental protection and social responsibility, globally.

In Smithers Pira’s new report on this topic, The Future of Sustainable Nonwovens to 2022 (http://www.smitherspira.com/industry-market-reports/nonwovens/the-future-of-sustainable-nonwovens-to-2022), a nonwoven product or process is defined as one that is developed and produced sustainably as defined above. For every product, process and raw material, a percentage is developed using sustainable concepts, and a percentage is developed using non-sustainable methods. For every nonwoven product, process, raw material and end use, the percentage of sustainable development is assessed and used to define the ‘sustainable nonwoven’ segment of that product, process or application.

Market Size
The global consumption of all nonwovens in 2017 is 10.1 million tons, equivalent to $42.3 billion or 269.8 billion square meters. Growth in 2012-17 is quantified by annual rates of 6.5% in dollar terms, 7.4% in square meters and 6.5% in tons. Growth in 2017-22 is projected at annual rates of 6.3% in dollar terms, 7.2% in square meters) and 6.2% in tonnage.

The sustainable nonwovens market is smaller but growing more quickly, especially in the more mature markets of Western Europe and North America. The global consumption of sustainable nonwovens in 2017 is 3.7 million tons or 94.8 billion square meters, valued at $14.1 billion. Annual growth rates in 2012–17 were 10.5% in tons, 11.6% in square meters and 11.2% in dollars. The annual growth rates for 2017–22 are projected at 6.4% in tons, 7% in meters and 7.1% in dollars.

Wipes are the most developed sustainable end use, while hygiene is the least developed sustainable end use. Medical is not as well represented in sustainable disposable end uses as it is in the overall disposable nonwovens market.

Drivers
The drive for sustainable products and processes in all markets has been growing for the last two decades. For some markets, it has been the fear of global warming driving change, for others, the uncertainty of future petroleum supply and cost, and for others the overflowing landfills. Whatever the driving force, many in the global community desire more sustainable products.

The nonwovens industry is no different and, in fact, may be even more driven to develop sustainable products due to its high level of dependency on disposable products, many of which are among the most visible products in the world, such as disposable baby diapers and disposable wipes. Consumers, retailers and governments have all viewed these products with questions, desires and sometimes demands.

It is imperative that the nonwovens industry continues to progress toward sustainability in products and processes; first, because it is good for the global community and secondly, because it is (in the long term) good for business.

The key drivers for the progress of sustainable nonwovens, according to Smithers Pira’s latest research, are:

• Consumer demand: Consumers want many things from nonwovens, including low prices, high performances, aesthetics and convenience. A growing desire from these consumers over the last five years has been sustainability.
• Retailer demand: Walmart announced a unilateral implementation of environmentally friendly policies in the mid-2000s, and in 2006 unveiled a sustainable packaging scorecard, for which suppliers were required to provide data. While packaging was the first area emphasized, both Walmart and its suppliers have acknowledged that other areas will follow, including textiles (and nonwovens). Without judging Walmart’s real motivation, the fact remains that a retailer that made its fortune on pricing is now embracing environmentalism and when Walmart talks, nonwoven product suppliers listen.
• Regulatory issues: The cost for making non-sustainable products comply with growing regulations makes the proactive development and production of inherently sustainable products not only good for the environment, but good for business and profits.
• Raw material supply/cost: Even if altruistic or commercial reasons do not motivate the development of more sustainable products and processes, commercial survival does. The fact that petroleum as an affordable raw material has a finite lifetime means that the sooner work on truly sustainable products based on renewable resources begins, the more likely that products and processes will survive economically.
• Cost in resources: A major driver for the growth of sustainable nonwovens is the lower cost of such products compared to alternative materials.
• Global/societal responsibility: All companies realize that being a good global citizen is good for business; and most now realize that sustainability is part of being a good global citizen.

Process Trends
For sustainable nonwovens, drylaid, along with spunlace and needlepunch are favored for sustainable nonwovens, leads all processes. Spunlaid is the second largest process used to process sustainable nonwovens, not because existing products are sustainable, but because this process is currently so large and so important in the nonwovens industry. The cost effectiveness and performance advantages make this technology very difficult to displace; it is more likely that solutions such as recycling and biopolymer raw materials will be found to preserve its usefulness in sustainable nonwovens.

Airlaid is third in usage for sustainable nonwovens. This low energy, low waste process relies heavily on the most sustainable raw material (wood pulp) and is, on average, the most sustainable process. Unfortunately, not all products can be made with airlaid; lightweight (less than 45 gsm) hydrophobic products are very difficult and expensive. Additionally, global airlaid capacity is limited and expansion is slow.

Wetlaid has the smallest representation among nonwovens processes used for sustainable nonwovens. This is more a reflection of wetlaids’ small share of the overall nonwovens market than its lack of sustainability. With its ability and tendency to use large quantities of wood pulp as a raw material and, with hydrogen bonding providing at least some strength, the process is relatively sustainable. However, chemical, energy and water use are issues.

Material and Geographic Trends
There are dramatic differences between all nonwovens raw material use and sustainable nonwovens raw material use. For all nonwovens, polypropylene fiber and polymer account for 54.1% of the raw materials consumed in 2017. For sustainable nonwovens, polypropylene polymer and fiber account for only 29.3% (recycled and recyclable polypropylene, blends with biopolymers and bio-sourced polypropylene). For all nonwovens, cellulose-based raw materials (wood pulp, rayon, lyocell, cotton and others) account for only 17% of raw materials consumed in 2017; for sustainable nonwovens that percentage increases to almost 32.6%.

Europe leads the world in sustainable nonwovens, but growth will be slower in the future than it has been up until 2017. North America is the second largest market and will also slow—but not to the extent that Europe will. Meanwhile Asia, which is third globally in tons of sustainable nonwovens consumed, is expected to see impressive growth through to 2022.

These trends are analyzed, qualified and quantified in full in the Smithers Pira report The Future of Sustainable Nonwovens to 2022. [http://www.smitherspira.com/industry-market-reports/nonwovens/the-future-of-sustainable-nonwovens-to-2022]. This exclusive market and business strategy publication is available for purchase now.


“The drive for sustainable products and processes in all markets has been growing for the last two decades. For some markets, it has been the fear of global warming driving change, for others, the uncertainty of future petroleum supply and cost, and for others the overflowing landfills.”



Smithers Pira is the worldwide authority on packaging, paper and print industry supply chains. Established in 1930, Smithers Pira provides strategic and technical consulting, testing, intelligence and events to help clients gain market insights, identify opportunities, evaluate product performance and manage compliance. For more information please visit www.smitherspira.com.